Brakes

A brake is a device for slowing or stopping the motion of a machine or vehicle, or alternatively a device to restrain it from starting to move again. The kinetic energy lost by the moving part is usually translated to heat by friction. more...

Home
Airsoft
Archery
Backyard Games
Baseball & Softball
Basketball
Bowling
Camping & Hiking
Cheerleading
Climbing & Caving
Cricket
Curling
Cycling
Accessories
Bicycle Parts
BMX Bike Parts
Brakes
Cranksets & Bottom Brackets
Forks
Handlebar Pads, Pad Sets
Handlebars & Grips
Headsets, Stems
Other
Pedals
Pegs
Rims & Hubs
Seats & Seat Posts
Sprockets, Chain Rings
Tubes & Tires
Wheelsets
BMX-Old School Bike Parts
Mountain Bike Parts
Brakes
Cassettes & Freewheels
Cranksets & Bottom Brackets
Derailleurs
Forks
Handlebars & Grips
Other
Pedals
Rims & Hubs
Seats & Seat Posts
Shifters
Shocks
Stems
Tubes & Tires
Wheelsets
Parts for Other Bike Types
Road Bike Parts
Brakes
Cassettes & Freewheels
Chain Rings
Cranksets & Bottom Brackets
Derailleurs
Forks
Handlebars
Other
Pedals
Rims & Hubs
Seats & Seat Posts
Shifters
Stems
Tubes & Tires
Wheelsets
Universal Bike Parts
Cables
Chains
Other
Seat Posts
Seats
Bicycles & Frames
Books & Video
Clothing, Shoes &...
Other
Vintage
Disc Golf
Equestrian
Fencing
Field Hockey
Fishing
Football
Geocaching
Go-Karts (Recreational)
Golf
Gymnastics
Hang Gliding & Paragliding
Hunting
Ice & Roller Hockey
Inline & Roller Skating
Lacrosse
Other
Paintball
Paragliding
Rugby
Scooters
Skateboarding
Sky Diving
Soccer
Track & Field
Triathlon
Volleyball
Wrestling

Alternatively, in regenerative braking, much of the energy is recovered and stored in a flywheel, capacitor or turned into alternating current by an alternator, then rectified and stored in a battery for later use.

Note that kinetic energy increases with the square of the velocity (E = 1/2·m·v² relationship). This means that if the speed of a vehicle doubles, it has four times as much energy. The brakes must therefore dissipate four times as much energy to stop it and consequently the braking distance is four times as long.

Brakes of some description are fitted to most wheeled vehicles, including automobiles of all kinds, trucks, trains, motorcycles, and bicycles. Baggage carts and shopping carts may have them for use on a moving ramp.

Some aeroplanes are fitted with wheel brakes on the undercarriage. Some aircraft also feature air brakes designed to slow them down in flight. Notable examples include gliders and some WWII-era fighter aircraft. These allow the aircraft to maintain a safe speed in a steep descent. The Saab B 17 dive bomber used the deployed undercarriage as an air brake.

Deceleration and avoiding acceleration when going downhill can also be achieved by using a low gear; see engine braking.

Friction brakes on cars store the heat in the rotating part (drum brake or disc brake) during the brake application and release it to the air gradually.

Effects on noise pollution

The action of braking for motor vehicles produces recognizable sound level emissions, varying with the specific tire types and with the roadway surface type produces considerable effect upon sound levels or noise pollution emanating from moving vehicles. There is a considerable range in acoustical intensities produced depending upon the specific tire tread design and the rapidity of deceleration required to slow the vehicle.

Read more at Wikipedia.org