Cassettes & Freewheels

On a bicycle, the cassette or the freewheel (previously also known as a block or cluster) is the set of rear sprockets that attaches to a hub on the rear wheel. The cassette is a later development than the freewheel. more...

Home
Airsoft
Archery
Backyard Games
Baseball & Softball
Basketball
Bowling
Camping & Hiking
Cheerleading
Climbing & Caving
Cricket
Curling
Cycling
Accessories
Bicycle Parts
BMX Bike Parts
Brakes
Cranksets & Bottom Brackets
Forks
Handlebar Pads, Pad Sets
Handlebars & Grips
Headsets, Stems
Other
Pedals
Pegs
Rims & Hubs
Seats & Seat Posts
Sprockets, Chain Rings
Tubes & Tires
Wheelsets
BMX-Old School Bike Parts
Mountain Bike Parts
Brakes
Cassettes & Freewheels
Cranksets & Bottom Brackets
Derailleurs
Forks
Handlebars & Grips
Other
Pedals
Rims & Hubs
Seats & Seat Posts
Shifters
Shocks
Stems
Tubes & Tires
Wheelsets
Parts for Other Bike Types
Road Bike Parts
Brakes
Cassettes & Freewheels
Chain Rings
Cranksets & Bottom Brackets
Derailleurs
Forks
Handlebars
Other
Pedals
Rims & Hubs
Seats & Seat Posts
Shifters
Stems
Tubes & Tires
Wheelsets
Universal Bike Parts
Cables
Chains
Other
Seat Posts
Seats
Bicycles & Frames
Books & Video
Clothing, Shoes &...
Other
Vintage
Disc Golf
Equestrian
Fencing
Field Hockey
Fishing
Football
Geocaching
Go-Karts (Recreational)
Golf
Gymnastics
Hang Gliding & Paragliding
Hunting
Ice & Roller Hockey
Inline & Roller Skating
Lacrosse
Other
Paintball
Paragliding
Rugby
Scooters
Skateboarding
Sky Diving
Soccer
Track & Field
Triathlon
Volleyball
Wrestling

Cassettes and freewheels are not the same, but because many bicycle users do not understand the differences, the terms are often used interchangeably, though incorrectly.

Freewheels

A freewheel consists of the rear cogset and a ratcheting mechanism in a single replaceable assembly. Freewheels must be used with threaded hubs. The freewheel is attached to the hub by means of a right-hand thread. Traditional rear hubs had a standardized set of threads onto which a standard freewheel was screwed. This allowed many different brands of freewheels to be mounted on different brands of hubs. Unlike many cassettes, the individual sprockets in a freewheel can be removed or replaced if necessary. Most bicycles used this system of freewheels and threaded hubs until the late 1980s.

Cassettes

Over the last few years the cassette type hubs, called freehubs, have largely replaced the conventional threaded rear hub. A freehub incorporates the ratchet mechanism into the hub body. The ratchet mechanism is still replaceable on most hubs. Many users lament the loss of the brand interchangeability that existed with most freewheel systems. However, cassette systems have a major advantage in that the drive-side axle bearing can be out near the frame, rather than being back towards the center of the axle behind the freewheel. This greatly reduces the stress on the rear axle, so it does not fail as often and can be lighter. Cassettes work so well that they have become the new standard. Most quality bikes made since the late 1980s have used this greatly improved design.

Cassettes are distinguished from freewheels in that a cassette typically has a series of straight splines that form the mechanical connection between the gears and the hub. The entire cassette is retained on the hub by means of a screwdown lockring. Some cassette systems from the late 1980s and early 1990s use a threaded small cog to hold on the larger splined cogs, the entire set referred to as a cluster. Cassettes resemble freewheels, but lack a contained freewheel mechanism.

The sprockets are commonly sold as a set, called a \"cassette\". The sprockets in a cassette are usually held together by three small bolts or rivets for ease of installation. These bolts or rivets are by no means necessary, they just make it easier to keep the sprockets and spacers in the correct order and position when they are removed from the ratchet body. Individual sprockets are also available. When the sprockets need to be replaced or the user wishes to replace them to change gear ratios, only the sprockets are replaced, not the ratchet mechanism.

Read more at Wikipedia.org